Respon 1 (Summarized)

Nama    :  Harini

Nim       :  08.240.0016

Kelas    :  6M41               

Router>enable

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.18.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int fa1/0

Router(config-if)#ip add 172.19.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int se2/0

Router(config-if)#ip add 172.17.1.2 255.255.0.0

Router(config-if)#clock rate 9600

Router(config-if)#exit

Router(config)#ip route 0.0.0.0 0.0.0.0 se2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#wr mem

Building configuration...

[OK]

Router1

Router>enable

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 172.16.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int se2/0

Router(config-if)#ip add 172.17.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#interface Serial3/0

Router(config-if)#ip add 10.10.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#clock rate 9600

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#ip route 172.16.0.0 255.252.0.0 se2/0

Router(config)#ip route 10.0.0.0 255.252.0.0 se2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#wr mem

Building configuration...

[OK]

Router2

Router>enable

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to upbl

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 10.1.1.1 255.255.0.0

Router(config-if)#no shut

Router(config-if)#exit

Router(config)#int se2/0

Router(config-if)#ip add 10.10.1.2 255.255.0.0

Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

Router(config-if)#exit

Router(config)#ip route 0.0.0.0 0.0.0.0 se2/0

Router(config)#^Z

%SYS-5-CONFIG_I: Configured from console by console

Router#wr mem

Building configuration...

[OK]